Waypoint Tracking Solutions
How to Set Up and Deploy Your Camera
Thank you for your purchase of our Dissembler Camera System. This page is here to help you set up and deploy your camera as well as reviewing your video.
The Dissembler Standard Camera System is a covert pole camera system. That is designed to blend into the environment, hiding in plain sight. Our system is reliable and affordable.
This system is a great tool for conducting unmanned surveillance in areas where typical surveillance is not possible. Our system is used by Law Enforcement and Private Investigators.
Typical applications include but are not limited to, child custody, cohabitation, infidelity, theft and criminal activity.
The dissembler Camera System can be deployed in seconds and designed to easily swapped out for a fresh unit.
Field tested for over 5 years with excellent results.
In The Box
(1) Brickhouse Camscura Pro Hidden Camera.
(1) Pre Formatted 64 GB Micro SD Card with adapter
(4 ) Mounting Screws
(1) Wall Charger
(1) USB Computer Wire
(1) Dissembler Camera Housing Front and Back Cover
(1) Camera Manual
(1) Complete Instructions included photos and videos on SD Card
Special Feature: Hidden camera with 36 hr recording battery life and 5 recording modes
Camera 4.6" x 2.36" x 0.75"
Dissembler Housing 5.25”X 5.50” X 1.18”
Power: Battery 36 Hours Recording time
Transmission: Built-In Recorder
Storage: SD Card up to 128GB 15 minute/GB (high frame rate) 1 hour/GB (low frame rate)
Service: No monthly fee
Audio: No recording
Adjustable Resolution: 1280x720 or 640x360 (16:9)
Frame Rate: 20FPS High or 6FPS Low
Day and Night modes
Up to 36 hours of battery life
90-degree field of view
Supports SD cards up to 128GB (Please use the software from this link to format the SD card.)
Recording Triggers: Audio, Vibration, Motion, (PIR Not Used with Dissembler Camera System)
Schedule Recording available
Operating Systems: Windows 2000/ XP, Vista 7/8, Windows 10, Mac OS X
Record up to 36 hours total
Records video no audio
Discreet and easy to deploy
Durable and weather resistant
Camera Set Up
Charge your camera with provided charger. Light will be orange until charged then light will turn green. Full charge can take up to eight (8) hours to complete.
On the back of the camera is a switch. The switch must be turned to the “gear” position to work properly in the housing.
Remove micro SD card from adaptor and place in appropriate slot in camera.
Using provided USB cord, plug camera into your computer. Install Brickhouse software located on the SD card inside your camera or click this link:
Run BHS software.
Below are the recommended default settings to use with the Dissembler. This allows up to 36 hours of total recording.
Important, the time and date on your computer must be synced with the camera otherwise the camera will default to an arbitrary date and time.
Note: Vertical flip allows for proper orientation, otherwise your videos will be up-side-down.
Note: PIR-Trigger (Passive Infrared Sensor) is disabled due to distance limitations. Leaving it enabled can decrease battery life.
Note: Motion Trigger Sensitivity may be enabled but can be very sensitive. A leaf blowing by, rain, change in shadows by passing clouds can trigger a recording.
Scheduled Recording: Click Edit. To pick specific schedule times to record, left click and hold in the day/time you wish to start and drag the mouse to the time you wish to stop recording. A window will pop up after you have made your selection prompting options for types of recordings.
Click “Create” when done. Repeat as necessary for this schedule. When finished setting up the schedule, click “OK” and you will return to the main settings.
Sync settings to DVR by clicking “Sync Settings to DVR”. The orange exclamation triangle will change to a green check mark when the process is complete.
Turn camera on:
To turn on the camera hold the button down until you see the green light come on. The green light will flash as it powers up. The light will turn off once the camera finishes booting up. This process can take up to 30 seconds. The camera is still on.
Place camera inside housing:
Align camera lens with hole in front cover of housing.
Place rear cover to front cover and snug the attached screws into place. Do not over tighten.
Attach Dissembler to wooden pole using provided screws or attach to metal pole using nylon straps.
Note: Carefully use power drill/Screw Driver to tighten screws against the Dissembler. Over-tightening can damage the cover.
Remove camera when surveillance is concluded or battery life is up, whichever is sooner.
All Dissembler camera housings fit on the same screw template. For longer cases, cameras can easily be switched out for continued surveillance.
Turn Camera Off:
Hold button down. An orange light will come on, continue to hold until light goes off.
Plug Camera into computer to view files. A folder labeled “BHS” on a removable drive will be available. All video files will be located inside the folder.
Attached using Nylon Straps. Long Straps can be found at Lowes or Home Depot. You may need to attach two straps together depending on the size of the pole.
Dissembler Standard Camera System Unboxing: https://youtu.be/BIZFeicILFA
Dissembler Extended Camera System Unboxing: https://youtu.be/7Rb4P7UoXPc
Connect Camera to Your Computer: https://youtu.be/29QJB94AXLc
Programming Camera: https://youtu.be/M46pDzcplB8
How to install on pole: https://youtu.be/kfXzDFmpOtY
AVI Video Joiner Software (Optional): This software allows you to take many AVI video files and join them into one large video file. This is easier when viewing the files.
Format 64 GB SD cards or Higher: Software to format 64 GB card
Video Player: Free video download. This video player allows for easier review of surveillance video. VLC Video Player Download Page
Sample Surveillance Videos:
Waypoint Tracking Soultions is a Division of Lancaster Detective Agency LLC